Tail lights not working?

[m38inmaine]

I could have sworn my machine had tail lights and now I have none. I have headlights, reverse lights, and brake lights but no tail lights. Did a quick check and all the fuses are good as are the wiring connections.

[dieselsmith]

Do what I do, call the dealer and let them deal with it.

[WOEII]

No brake lights either? :lurk:

[m38inmaine]

I have brake lights, reverse lights, headlights but no tail lights. I guess I should have asked directly, the 825i should have tail lights correct? If so mine have stopped working, bulbs-fuses good.

Mark

[gatorxuv620i]

Ya, taillights are standard on 825i's.... Id call the dealer like dieselsmith said and let'm deal with it...

[dieselsmith]

I can't think it would be the 1 filament burnt out of both bulbs.

[WOEII]

I can't think it would be the 1 filament burnt out of both bulbs.
:lurk:

[m38inmaine]

Problem fixed. I pulled the connector off the back of the light switch to check the power there and noticed the lower left pin on the switch was bent "outside" the connector. Straightened out the pin, pushed the harness connector back on and lights! Who ever installed the connector did not line it up correctly when they pushed it on. It is in a tough to see spot and at an angle, still no excuse and should have been caught in a quality control check of the lighting system.

[gatorxuv620i]

Hmmmm, interesting. Well I know that when Ive taken my gator to the dealer (15+ and counting times!!!) I finally took the door handle off the glass door and found that they had fixed the rattling noise I had and then came back with DUCT TAPE!!!! You gotta be sh**ing me right??? I dont pay JD $75 for a Duct tape job... I can do that myself lol