PDA

View Full Version : 825i Belt Sqealing at start up



Dakotadad
06-21-2011, 08:19 AM
I have a new 825i. When you start the machine, the is a squealing noise for a couple seconds. I'm assuming this belt in the CVT? Is this normal for these machines? Thanks for the help.

dieselsmith
06-21-2011, 09:40 PM
No I think its the serpentine belt of the engine, mine does it too-especially if it is damp.

Vip123
06-22-2011, 07:34 AM
Mine had that squeal, turned out to be the alternator belt, it was a little on the loose side. Just tightened it up a bit and stopped it.

mossyoak
06-23-2011, 10:05 AM
Mine had that squeal, turned out to be the alternator belt, it was a little on the loose side. Just tightened it up a bit and stopped it.

Mine has this same squeal. It is prominent at slow speeds, but disappears at higher speeds. Alternator belt? If not, which belt? By the way, it was damp outside.

825joe
06-23-2011, 10:24 AM
check tension as well. it can be adjusted if need be. :Thmup:

mossyoak
06-24-2011, 08:54 AM
Found out what my squeal was... The squeal stopped when the Gator stopped so I knew that threw the belt idea out the window. Right below the seats under the Gator the drive shaft goes thru a rubber piece before it goes under the cab. The shaft rubbing on that rubber piece was making my squeal. Shot it with lube and it's alllllll gone... Thank goodness! It was about to drive me nutty! So glad it was that simple!!!

Dakotadad
06-26-2011, 08:28 AM
Thanks for the help!