PDA

View Full Version : blowing fuse



taxidrmy660
01-17-2012, 10:03 PM
HI
I am new to the forum I have a 2011 825i gator in camo I have the deluxe glass cab with curtis industrys heater and just put a 72" KFI snow plow on it
I have blowen 2- 15 amp key switch fuses when plowing after dark I have the deluxe light kit I called my dealer and they said to replace the 15 amp fuse with a 20 amp fuse. The 15 amp fuse blows when I have all the lights on and when I shift into reverce and the back up lights come on they said the 20 amp fuse should take care of my trouble. I was wondering if it is safe to go to a larger fuse? anyone had this trouble? any help would be great. Thanks

GATORDONE
01-18-2012, 10:40 AM
Your dealer is correct on that, I had to replace mine with a 20 also. If you blow the 20 then you better look for pinched wires on the harnesses.:BG:

825joe
01-18-2012, 11:00 AM
I agree with GATORDONE. :Thmup:

taxidrmy660
01-19-2012, 12:31 AM
Thank you guys very much I will give it a try.

bowman
05-09-2012, 10:05 PM
Anybody out there have installation instructions for front light kit BM21651 on a 2011 825i deluxe cab.:Cnfsd:

Bowman
Howell,Mi

pahawi
05-10-2012, 06:33 PM
Anybody out there have installation instructions for front light kit BM21651 on a 2011 825i deluxe cab.:Cnfsd:

Bowman
Howell,Mi

If it's the "Front Work Light Kit" that mount on the top of the deluxe cab., PM me your email address and I'll pass you pics of my instructions.

Paul

dieselsmith
05-10-2012, 10:02 PM
YES YES YES! I had the same problem! I though nobody else did! Mine blew back in the woods about a mile from my house and everything was dead. I knew it was electrical but figured to knock out everything it had to be a larger amp fuse and those were the only ones I checked. Had to drag it back with my tractor cause the quad wouldn't move it. About 6 hrs of work, got my tractor wedged between 2 trees, middle of night, blizzard on its way, 15-20 beers and 2 cut down maples later it was back at the house. I was pissed to say the least! Somebody should make it sticky or put some kind of bulletin up if you put a bunch of lights on, shift into reverse in 4 wheel drive it can die on the spot!