825i only goes 30 mph

[haakfarm]

just brought a used 825i with 50 hours on. It only goes 30 mph at 6000 rpms. Is my drive belt bad?

thanks for the advice

[pahawi]

Just a thought - check if the previous owner had the Speed Limiting Clutch Kit installed.

Paul

[purplewg]

Or possibly a rev limiter. Seems to me like mine turns far more than 6000RPM. Check this out also.

http://www.deere.com/wps/dcom/en_US/products/attachment/gator_attachments/high_performance_accessories/speed_limiter_kit/speed_limiter_kit.page

[pahawi]

Check this out also.

Unfortunately, the speed limiter you link to, don't fit the 825i. There's a seller at eBay that sells lots of Gator accessories, who keeps listing the same kit as a 825i kit, but it isn't. The speed limiter for a 825i is just a simple spacer placed in the clutch.

Paul

[purplewg]

Unfortunately, the speed limiter you link to, don't fit the 825i. There's a seller at eBay that sells lots of Gator accessories, who keeps listing the same kit as a 825i kit, but it isn't. The speed limiter for a 825i is just a simple spacer placed in the clutch.

Paul

Yep, upon further review it looks like it only works on the 625i.

[homert3]

High idle should be around 6000rpm. I think you have a clutch problem - potentially sticky rollers or weights. I don't think they are opening up all the way.

[purplewg]

High idle should be around 6000rpm. I think you have a clutch problem - potentially sticky rollers or weights. I don't think they are opening up all the way.

High idle:hdscrh:

[GATORDONE]

High idle:hdscrh:

Thats J.D. terminology for highest rpm's it should run.

[purplewg]

Thats J.D. terminology for highest rpm's it should run.

Ah thanks Gatordone. I have never heard that term.

[haakfarm]

Thanks for the help, there was a speed limiting clutch kit installed.

[BrynaCecil]

wheel base on the RZR S. Anything up to that size should be fine on the trails.