modified amt 600 (not sure what year yet)

[gatorsalad]

I have acquired 2 amt 600's in the past few months, I have made some simple but "necessary"( ha ha) mods to it. First of the mods is a light bar with Harley turn signals, the next thing i did was make new front wheel skirts.(from scrap metal) then i made my own trailer hitch bar. I also added some angle iron to the top of the removable gate on the box so i can back up to my trash receptacles and pic them up to haul to the end of the driveway and back. I also extended a rod for gear shifting up to the front of the vehicle and moved all the switches to the top of the console for easier reach. my other gator is pretty much complete (minus rear box) but it has no spark. they both have the hydraulic lift. I am going to be making a "ladder rack that extends over the driver and cover it with a tarp . I have also thought about using an old JEEP rag top to cover it. hope you enjoy the photos. I will post more as i do more.

[gatorsalad]

http://youtu.be/mC1SrqjhXOY

[juttu]

You can match the year with this table:

https://groundscare.custhelp.com/ci/fattach/get/51747/0/filename/1148+-Year+Models+-+UV.pdf

AMT 600
1987
W00600X001101 - 15403
AMT 600
1988
W00600xX015404 - 18720
AMT 600
1989
W00600X018721 - 20879
AMT 600
1990
W00600X020880 - 217863

Yes I think so too..there is a misprint in the file 1990 :BG:
must be!?

[gatorsalad]

thanks !

[Rod7290]

Can anyone advise me how to remove a steering wheel off a gator amt 626. There is a Phillips head screw going thru the shaft with a nut on the opposite side. I removed the nut. The Phillips head screw will not move. I've soaked it in penetrating oil and nothing.

[Mr. Moose]

Under the Deere symbol is a nut I'm pretty sure and it comes out and then the wheel itself comes off. I've had the whole front end apart a year ago but don't quite remember how it's held together down in the bottom.