clack in transmission

[karterfarm747]

I've got a 2013 825i and it's had a bunch of little problems. Had to bring it in 3 times for clunking in yhe front end ended up being ball joints started at about 15 hours on machine. The machine binds quite a bit in 4wd and pulls to one side. Is reset by putting in reverse then I can drive normally in 4wd. The bed lift quit on me. Ended up getting unplugged. The shift linkage needs to be adjusted, it's kind of hard to get into reverse sometimes. My fuel pump is almost as loud as the engine. But the clacking that occurs sometimes and the way that it jerks into drive seems not right. I was told that was normal with a roller roating and taking up slack as the clutches take hold.

has anyone had this clacking issue or had this many things going on. I've got 276 hours and use it on a small farm. I'm new to this forum so go easy on me

thanks in advance, Lee