2 Inch Lift Came Today.

[WOEII]

I just put oversized Grim Reaper tires on the front and under heavy trail bouncing or hard turns it will rub under the plastic fender. The rub noise just goes right through you when it happens. :Wlys:
http://i41.tinypic.com/b9dopt.jpg

Here is what the spacers look like and they say it's a simple install.
http://i39.tinypic.com/swpjt3.jpg

http://i40.tinypic.com/72unvb.jpg

I got a Adirondack mud fest early June so I gotta get this rubbin crap to stop. My plan was for the spacers and the HD shocks. But I am worried that the HD shocks might be to stiff for trail ridin. Gonna be trial and error with this project. :OhNoes:

Hopefully my friend will help with the install this weekend. :FX:

Will take pics of the project. :lurk:

[Deere John]

:cool: Shouldn't be too hard. Even body lifts for trucks aren't usually too much trouble.

[WOEII]

:cool: Shouldn't be too hard. Even body lifts for trucks aren't usually too much trouble.
Gave in man! :Rofl: The 212 mower crapped out so I took that and the gators down to the dealer for fixins and install. To :Wlys: latley to take a break man! :bdh:

[Yooper1]

I lifted my front 2" with the new Heavy duty struts that were $220.00. That is the way to go!

[WOEII]

I lifted my front 2" with the new Heavy duty struts that were $220.00. That is the way to go!
How are the HD shocks for trail riding? Almost got them but was worried that the HD shocks were more for the plow and controling the heavy weight. :lurk:

[Yooper1]

They are the DEAL! no more bottoming out and no body roll! Trust me, you want these and it bring up your front end too.

[tommy20/69]

i made my lift from i think it was 1-3/4 pipe i cut some nipples out of it and it worked the same way till axles started popping out . it cost me around 4.00 at lowes for a nipple and i cut them out with my chop saw. i eventually cut them back down to around 3/8 of an inch just enough to stop the rubbing but not enough to pop the axles out.

[bama21fs]

i made my lift from i think it was 1-3/4 pipe i cut some nipples out of it and it worked the same way till axles started popping out . it cost me around 4.00 at lowes for a nipple and i cut them out with my chop saw. i eventually cut them back down to around 3/8 of an inch just enough to stop the rubbing but not enough to pop the axles out.

Pictures please


Sent from my iPhone using Tapatalk

[825joe]

says pics no longer available. :(

[bama21fs]

Pictures please


Sent from my iPhone using Tapatalk

Let me get new 27 inch tires on and I definitely will do.


Sent from my iPhone using Tapatalk