Results 1 to 2 of 2

Thread: High Air Intake for 825i from Kubota parts

  1. #1
    Junior Member
    Join Date
    Jun 2013
    Posts
    19
    Thanks
    0
    Thanked 8 Times in 5 Posts

    High Air Intake for 825i from Kubota parts

    Yes gators are not submarines but the placement of the air intake is really poorly designed.
    If you suck in any amount of water you will have a very expensive repair bill, and the amount of dust the current air filter is exposed means you need to change it often.
    Here was my solution use the Kubota high ROPS air filter kit Part #v4271 https://www.messicks.com/partdetail/V4271.aspx
    For ~$200 you get a dual filter 5" air intake with all the bolts, tubes and minor mods you have a snorkel for your 825i
    Pics are from the RTV setup, but the supplied tubing will follow the gator ROPS.

    JD should make a similar kit available for Gators.
    Hope this helps someone.

    AirBox.jpgHighIntake.jpg

  2. The Following 2 Users Say Thank You to scoobieguy For This Useful Post:

    flyboy (09-26-2014),lodogg1971 (10-24-2014)

  3. #2
    Junior Member
    Join Date
    Aug 2014
    Location
    virginia
    Posts
    16
    Thanks
    7
    Thanked 0 Times in 0 Posts
    Thanks for the info i have been looking for something like this not so much for the water but to maybe help with noise as my intake is in the cab.Was going to make something but this will be a lot faster.
    2014 855d s4 poly cab,bench seats,3500 superwinch,duel batteries
    Waiting list-Cab lights,radio,heater,gun rack,sound proofing

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •